The
Software
...changes to software revision 2008.1.6.5.1
|
|
 |
Complete overview | |
 |
In the kit interface it is now possible to store for each device visibility and position of channels seperately. | ||
|
|
Dropping complete setting files on a device optimized: when the setting file has more or less channels than the device, channels using other channels as parameters are working correct after <Apply> | ||
|
|
Fixed bug: when the channelgrid is shown and a firmware update is done, after the update sometimes occured an access violation | ||
|
|
Fixed bug: When channel names longer than 16 charactes were used with a logger 6 after <Apply> only 16 characters were shown. After rereading the logger the full name was shown. | ||
|
|
Fixed bug: when a CAN channel higher than 176 (Logger 6) was used the measurement was unusable. | ||
|
|
Copying channels in the grid optimized (ca. 1/20 of the time) | ||
|
|
Dialog for BigDashHQ changed: it is now possible to set the real time clock of the dash. | ||
|
|
Number of tables is now shown in the tree. | ||
|
|
When a setting contained a table, that was not used by any channel, was copied to a device, the tables was not copied. Now all loadable tables are copied. | ||
|
|
When a new instrument is added in a Software Dashboard it is now possible to enter a minimum alarm time. The alarm condition must persist for that time before the alarm sound is played. | ||
|
|
It is now possible to assign a hotkey for Software Dashboard files in the options of WinIt. Dashboards with a key assigned are shown in the submenu "Templates" in the Software Dashboard dialog. Pressing the corresponding hotkey then loads the file. | ||
|
|
If it is not possible to download a block for three times, a new button appears on the download dialog, which allows to skip that block (will be filled with zeros) | ||
|
|
New Buttons in Software Dashboard to empty the memory of a logger, to start and stop recording and to activate the global filtering of channel values. | ||
|
|
New option: it is possible to activate an average filter for channel values used in channel grid, software dashboard and telemetry server. | ||
|
|
New option: it is possible to activate an average filter for channel values used in channel grid, software dashboard and telemetry server. | ||
|
|
It is possible to activate and deactivate the usage of the filter by pressing <CTRL><ALT><F> Import of ASAP2-files possible. | ||
|
|
Virtual calculation channels possible in softwaredashboard | ||
|
|
Droping table files from Windows Explorer to a table in the tree loads the table. | ||
|
|
Table dialog: new button to save a table read from a device. | ||
|
|
Interface dialog changed to handle new CCP-interfaces. | ||
|
|
New checkbox in channel dialog to activate hiding of CAN parameters for one channels. | ||
|
|
New checkbox in CAN-interface dialog to activate hiding of CAN parameters for all channels of one CAN port. | ||
|
|
Now able to handle new Stream-Logger | ||
|
|
New decompressor for stream logger | ||
|
|
Replay-function for Stream-logger | ||
